CONTACT
PRODUCT
HOME
COMPANY


Connector Socket


Product&Service

Connector Socket


  • Connector socket have three parts: socket lid, socket and connector PCB.
  • Solder connector PCB on test PCB, then mount socket on connector PCB.
  • Pitch range from 0.30 to 1.27mm
  • Key material: PEI,Peek,Torlon,PPS.etc
  • Contact with top pogo pin 


Socket Feature

  • Solder connector PCB on test PCB,then mount socket on connector PCB.
  • ​Connector PCB will be reballed, and size is same as that of chip.
  • No need to re-layout PCB, it is time and cost saving solution.
  • Wired out device test pad via connector PCB.

Socket Specification

  • Lid&house material:                              AL      
  • Insulation material:                               PPS,PEI,PeeK,Torlon
  • Contact material:                                  POGO pin(spring probe),silicone rubber
  • Contact length:                                     Min2.5mm,Max7.2mm
  • Contact rated current:                          Max 6.2A
  • Contact temperature rating:                 -40 - +120℃
  • Contact preload:                                  0.15mm,0.2mm,0.25mm(optional)
  • Contact force:                                     Min 6gf, Max 55gf
  • DC resistace:                                       Min 0.1ohm, Max100mohm
  • Life span:                                           Min 50k cycles, Max 100k cycles
  • Contact application pitch:                   Min 0.17mm
  • Contact material:                               top/bottomplunger: Becu/Au plated
                                                       barrel: Pd Alloy, Alloy/Au plated
                                                            spring: music wire/Au plated/ Stainless steel

Socket Drawing

Similar Connector PCB

BGA221 Connector Socket